How to Recover Bricked Samsung Galaxy Y S5360

Unknown 2 6:54 PM

Procedure to Update Samsung Galaxy Y with DDLA1 Official Global Gingerbread update:

Galaxy y Extracted files DDLA1
  • Now, enable the USB Debugging Mode in your phone from the path “Settings > Applications > Development > USB debugging”.
  • Turn Off the phone so as to enter the phone in the download mode. The download mode can be entered by pressing Volume Down Key + Middle button, and holding both simultaneously press the Power Button.
  • Now, open the Odin in your computer and connect the Samsung Galaxy Y S5360 to the computer in the download mode and after which you will see that the ID : COM section will turn yellow which will mean that all the drivers have been successfully updated and you are now ready to proceed to the next step.
  • Odin for Galaxy Y
    Wait for COM section to turn yellow or else your phone will be bricked.
    • Select the below mentioned files by clicking on the corresponding options in Odin.
    PIT- totoro_0623.pit
    Boot loader: DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5
    PDA: PDA_S5360DDLA1_REV05.tar.md5
    Phone: MODEM_S5360DDLA1_REV05.tar.md5
    CSC: GT-S5360-MULTI-CSC-ODDLA1.tar.md5
    Files added
    • Once you are done with the selection, click on “Start” to start the process of firmware update.Once the update is applied successfully, the device will be restarting and you may be asked to enter the Google Account preferences along with the Internet connectivity options etc.
    • Turn Off the phone so as to enter the phone in the recovery mode. The recovery mode can be entered by pressing  Volume UP on Volume Down Key + OK button, and holding both simultaneously press the Power Button. In the recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now with the help of Volume
    • In recovery mode, select “++++ Go Back ++++” and press the power button on the option of “reboot system now” for restarting the device.

2 comments

I have rooted my galaxy y s5360 using a wrong .zip file and now when I switch on my phone then it shows its name and not proceeding please help me send me an email with solution on mk30155@gmail.com

Hello, you can install a fresh copy of gingerbread by following procedures above.But all your data will be gone (Dont worry for sd data :) . After you recover your phone,dont forget to take nandroid backup via cwm because if you have it is very easy to recover bricked phones.
If the above not solving the problem ask for your friends if they have full nandroid backup on their phone and copy it to the root of your sd.
You have cwm right then boot to cwm and in restore&backup chose restore and select the file from it and confirm.
This will surely solve your problem

Post a Comment

If You Have any problems,feel free to comment.

Popular Posts

Blog Archive